Volume 6, Issue 5, October 2018, Page: 129-134
Experimental Validation of Roll Angle Estimates Using Atmospheric Temperature Sensors
David John Broderick, Computer Electronics & Graphics Technology Department, Central Connecticut State University, New Britain, USA
Adrian Mateusz Felczak, Computer Electronics & Graphics Technology Department, Central Connecticut State University, New Britain, USA
Christopher Glenn Wilson, Technology Services Corporation, Huntsville, USA
Received: Oct. 16, 2018;       Accepted: Oct. 31, 2018;       Published: Nov. 26, 2018
DOI: 10.11648/j.jeee.20180605.12      View  30      Downloads  25
Abstract
Accurately estimating the position and orientation is critical for the control systems of both airborne and ground-based unmanned vehicles. In many cases, GPS-derived data provides a suitable absolute measurement. Unfortunately, many unmanned vehicles may have to operate in GPS-denied environments, thus a suitable method for obtaining an absolute attitude measurement is highly desired. Thermal emissivity sensors have been experimentally shown to successfully estimate pose of airborne vehicles at high altitude or during continuously rolling maneuvers. Previous work has shown through simulation that the roll angle can be estimated with the vehicle orientation static using three or four thermal emissivity sensor arrays. The closed form estimation method previously presented for three and four sensor arrays is expanded to a six-sensor array. An array of eight sensors is developed to allow for simultaneous experimental data collection for all three arrays. The data is collected in a realistic and non-ideal environment and then processed with the proposed estimation algorithm for each of the three arrays. The results demonstrate that three-sensor arrays do allow for estimation of roll angle, with improved error bounds for increasing number of sensors in the array. Thus, low altitude absolute roll estimation is possible with a thermal emissivity sensor array and may be suitable for certain applications.
Keywords
Pose Estimation, Unmanned Aerial Vehicle, Gps-Denied, Thermopile
To cite this article
David John Broderick, Adrian Mateusz Felczak, Christopher Glenn Wilson, Experimental Validation of Roll Angle Estimates Using Atmospheric Temperature Sensors, Journal of Electrical and Electronic Engineering. Vol. 6, No. 5, 2018, pp. 129-134. doi: 10.11648/j.jeee.20180605.12
Copyright
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
J. Britt, D. J. Broderick, D. M. Bevly, and J. Y. Hung, “Lidar attitude estimation for vehicle safety systems,” in The Position Location and Navigation System (PLANS) Conference, 2010.
[2]
D. J. Broderick, J. Britt, D. M. Bevly, and J. Y. Hung, “Simple calibration for vehicle pose estimation using gaussian processes,” in Proceedings of Institute of Navigation (ION) 2011 International Technical Meeting (ITM), 2011.
[3]
D. Dusha, W. Boles, and R. Walker, “Attitude estimation for a fixed-wing aircraft using horizon detection and optical flow,” in Digital Image Computing Techniques and Applications, 9th Biennial Conference of the Australian Pattern Recognition Society on, Dec 2007, pp. 485–492.
[4]
“Spacecraft earth horizon sensors,” NASA, Tech. Rep. SP-8033, December 1969.
[5]
P. Duchon and M. Vermande, “Attitude measurement principles and sensors,” National Aeronautics and Space Administration, Tech. Rep., 1981.
[6]
T. Nguyen, “Attitude determination using infrared earth horizon sensors,” in 28th Annual AIAA/USU Conference on Small Satellites, 2014.
[7]
H. Tokutake, M. Kuribara, Y. Yuasa, K. Tanimoto, H. Seki, and T. Suzuki, “Attitude sensing system using photodetectors,” in International Workshop on Instruction for Planetary Missions, 2012, pp. 1022–1024.
[8]
H. M. Van Rensburg, “An infrared earth horizon sensor for a leo satellite,” Ph. D. dissertation, Stellenbosch: University of Stellenbosch, 2008.
[9]
J. McBride, “Flight control system for small high-performance uavs,” Master’s thesis, Virginia Commonwealth University, 2010.
[10]
G. Egan and B. Taylor, “The use of infrared sensors for absolute attitude determination of unmanned aerial vehicles,” Monash University, Tech. Rep., 2006.
[11]
The paparazzi project (http://paparazzi.enac.fr).
[12]
J. Rogers and M. Costello, “Design of a roll-stabilized mortar projectile with reciprocating canards,” J Guid. Contr. Dynam, vol. 33, no. 4, pp. 1026–1034, 2010.
[13]
J. Rogers, M. Costello, and D. Hepner, “Roll orientation estimator for smart projectiles using thermopile sensors,” Journal of Guidance Control and Dynamics, vol. 34, no. 3, p. 688, 2011.
[14]
J. Rogers and M. Costello, “A low-cost orientation estimator for smart projectiles using magnetometers and thermopiles,” Navigation, 2012.
[15]
D. J. Broderick and C. G. Wilson, "Roll angle estimation of airborne vehicles using the minimal array of atmospheric temperature sensors." Systems, Applications and Technology Conference (LISAT), 2015 IEEE Long Island. IEEE, 2015.
Browse journals by subject