Volume 6, Issue 3, June 2018, Page: 88-93
Instrumentation Selection Analysis for an Air Compressor System and Enhancement Proposal by Sensors Based on Nanostructures
Jesús Alan Calderón Chavarri, Department of Applied Nanophysics, Ilmenau University of Technology, Ilmenau, Germany
Luis Ricardo Chirinos García, Energy Laboratory, Pontifical Catholic University of Peru, Lima, Peru
Enrique José Barrantes Peña, Energy Laboratory, Pontifical Catholic University of Peru, Lima, Peru
Ronald Eduardo Mas Bautista, Energy Laboratory, Pontifical Catholic University of Peru, Lima, Peru
Received: Jun. 6, 2018;       Accepted: Jul. 16, 2018;       Published: Aug. 29, 2018
DOI: 10.11648/j.jeee.20180603.14      View  487      Downloads  66
Abstract
Air compressor systems are widely used in industry due to increase pressure level of gases in order to solve many tasks such as in air supply, or just to transmit mechanical movement. For this reason, instrumentation selection is quite important because correct and precise physical variables are necessary requirements to get a uniform pressure level transmission. The physical variables of an air compressor system were studied by its instrumentation selection based on sensors/actuators physical parameters such as response time and robustness. Furthermore, it was shown the compressor system performance enhancement while instrumentation is based in nanosystems like nanosensors and nanoactuators.
Keywords
Sensors, Thermodynamic Systems, Nanosensors, Compressor System
To cite this article
Jesús Alan Calderón Chavarri, Luis Ricardo Chirinos García, Enrique José Barrantes Peña, Ronald Eduardo Mas Bautista, Instrumentation Selection Analysis for an Air Compressor System and Enhancement Proposal by Sensors Based on Nanostructures, Journal of Electrical and Electronic Engineering. Vol. 6, No. 3, 2018, pp. 88-93. doi: 10.11648/j.jeee.20180603.14
Copyright
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
N. Instruments, «User guide and specifications NI myRio-1900». [En línea]. Available: http://www.ni.com/pdf/manuals/376047a.pdf.
[2]
N. Instruments, «NI CompactRIO High-Performance Real-Time Controllers», 06 11 2014. [En línea]. Available: www.ni.com/datasheet/pdf/en/ds-201.
[3]
L. Wang, Model Predictive Control System design and implementation using MATLAB., London: Springer-Verlag, 2009.
[4]
Honeywell, «Megopal Thermocouples, specifications», 1998.
[5]
S.-h. Jo, «Fabrication and crystalization of AAO template for sensor applications», 2012.
[6]
H. Yan, «Preparation and optical characterizacion of nanoporus templates as a basis for nanocontact arrays», 2012.
[7]
Y. Lei, «Highly ordered nanostructures with tunable size, shape and properties: A new way to surface nano-pattering using ultra-thin alumina masks», 2007.
[8]
Farnell, «Analog Devices: Monolithic Thermocouple Amplifiers with Cold Junction Compensation AD595», 1997. [En línea]. Available: http://www.farnell.com/datasheets/14024.pdf.
[9]
L. Ljung, Modeling of dynamic systems, Prentice Hall, 1994.
[10]
A. E. Pearson, «Aerodynamic Parameter Estimation Via Fourier Modulating Function Techniques», NASA, 1995.
[11]
J. Klamka, «Controllability of dynamical systems», Springer-Verlag, 2008.
Browse journals by subject